NRG4026T4R7M [TAIYO YUDEN]
SMD INDUCTORS LOW PROFILE TYPE; 贴片电感LOW PROFILE类型型号: | NRG4026T4R7M |
厂家: | TAIYO YUDEN (U.S.A.), INC |
描述: | SMD INDUCTORS LOW PROFILE TYPE |
文件: | 总15页 (文件大小:967K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Notice for TAIYO YUDEN productsꢀ
Please read this notice before using the TAIYO YUDEN products.
1
REMINDERS
■Product information in this catalog is as of October 2008. All of the contents specified herein are
subject to change without notice due to technical improvements, etc. Therefore, please check for the
latest information carefully before practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment
incorporating such products, which are caused under the conditions other than those specified in this
catalog or individual specification.
■Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual
specification is available.
■Please conduct validation and verification of products in actual condition of mounting and operating
environment before commercial shipment of the equipment.
■All electronic components or functional modules listed in this catalog are developed, designed and
intended for use in general electronics equipment.(for AV, office automation, household, office supply,
information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the
components or devices into any equipment in the field such as transportation,( automotive control, train
control, ship control), transportation signal, disaster prevention, medical, public information network
(telephone exchange, base station) etc. which may have direct influence to harm or injure a human
body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear
control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic
equipment, if the equipment or the electric circuit require high safety or reliability function or
performances, a sufficient reliability evaluation check for safety shall be performed before commercial
shipment and moreover, due consideration to install a protective circuit is strongly recommended at
customer's design stage.
■The contents of this catalog are applicable to the products which are purchased from our sales offices
or distributors (so called“TAIYO YUDEN’s official sales channel”).
It is only applicable to the products purchased from any of TAIYO YUDEN’s official sales channel.
■Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that
may occur in connection with a third party's intellectual property rights and other related rights arising
from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■Caution for export
Certain items in this catalog may require specific procedures for export according to“Foreign
Exchange and Foreign Trade Control Law”of Japan,“U.S. Export Administration Regulations”, and
other applicable regulations. Should you have any question or inquiry on this matter, please contact our
sales staff.
Should you have any question or inquiry on this matter, please contact our sales staff.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
3
△
△
SMDインダクタ(低背タイプ)
SMD INDUCTORS LOW PROFILE TYPE
ー25~+120℃(製品
自己発熱含む)
OPERATING TEMP
(Inducting self-generated heat)
特長ꢀFEATURES
・Small and Low profile inductor.
・小型、低背
インダクタ
・It corresponds to High current.
・大電流に対応
・Simple and original magnetic shield structure.
・シンプルで独自な磁気シールド構造
・Structure strong against a shock-proof.
・耐落
下衝撃に強い構造
用途ꢀAPPLICATIONS
For small DC/DC converter(cellular Phone, HDD,DVC, DSC, PDA, LCD
・携帯電話、HDD、DVC、DSC、PDA、液晶
ディスプレイ等の小型DC/DC
display etc).
コンバータ用途
形名表記法ꢀORDERING CODE
2
5
3
1
インダクタンス許容差
梱包
形式
NR△, NRG
外径寸法(W×L×H)
例
M
N
±20%
±30%
外装樹脂仕様
△=スペース
T△
テーピング
△=スペース
3010
3012
3015
4010
4012
4018
4026
6012
6020
6028
6045
8040
3.0×3.0×1.0mm
3.0×3.0×1.2mm
3.0×3.0×1.5mm
4.0×4.0×1.0mm
4.0×4.0×1.2mm
4.0×4.0×1.8mm
4.0×4.0×2.6mm
6.0×6.0×1.2mm
6.0×6.0×2.0mm
6.0×6.0×2.8mm
6.0×6.0×4.5mm
8.0×8.0×4.0mm
6
当社管理番号
△
標準品
△=スペース
4
公称インダクタンス〔μH〕
例
2R2
100
101
2.2
010.000
100.000
N R △ 4 0 1 8 T △ 1 0 0 M △
2
3
1
4
5
6
5
1
Type
2
3
Inductance tolerance
Packaging
T△
External dimension(s W×L×H)
example
M
N
±20%
±30%
NR△, NRG
Coating resin specification
Tape and Reel
△=Blank Space
△=Blank Space
3010
3012
3015
4010
4012
4018
4026
6012
6020
6028
6045
8040
3.0×3.0×1.0mm
3.0×3.0×1.2mm
3.0×3.0×1.5mm
4.0×4.0×1.0mm
4.0×4.0×1.2mm
4.0×4.0×1.8mm
4.0×4.0×2.6mm
6.0×6.0×1.2mm
6.0×6.0×2.0mm
6.0×6.0×2.8mm
6.0×6.0×4.5mm
8.0×8.0×4.0mm
6
Internal code
△
Standard product
4
△=Blank Space
Nominal inductance〔μH〕
example
2R2
100
101
2.2
010.000
100.000
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
342
△
△
外形寸法ꢀEXTERNAL DIMENSIONS
(2.3)
H
H
L
L
e
e
W
W
f
Type
L
W
H
e
f
Type
L
W
H
e
Δe
f
1.0 max
(0.039 max)
6.0±0.2 6.0±0.2 1.2 max 1.35±0.2 0.3±0.2 4.0±0.2
(0.236±0.008)(0.236±0.008)(0.047 max)(0.053±0.008)(0.011±0.008)(0.157±0.008)
6.0±0.2 6.0±0.2 2.0 max 1.35±0.2 0.3±0.2 4.0±0.2
(0.236±0.008)(0.236±0.008)(0.078 max)(0.053±0.008)(0.011±0.008)(0.157±0.008)
6.0±0.2 6.0±0.2 2.8 max 1.35±0.2 0.3±0.2 4.0±0.2
(0.236±0.008)(0.236±0.008) (0.110 max) (0.053±0.008)(0.011±0.008)(0.157±0.008)
6.0±0.2 6.0±0.2 4.5 max 1.35±0.2 0.3±0.2 4.0±0.2
NR 6012
(E Type)
NR 3010
NR 3012
NR 3015
NR 4010
NR 4012
NR 4018
NRG4026
5
3.0±0.1
3.0±0.1
1.2 max
0.9±0.2
1.9±0.2
(0.118±0.004) (0.118±0.004) (0.047 max) (0.035±0.008) (0.075±0.008)
NR 6020
NR 6028
NR 6045
1.5 max
(0.059 max)
1.0 max
(0.039 max)
1.2 max
(0.047 max)
(0.236±0.008)(0.236±0.008)(0.177 max)(0.053±0.008)(0.011±0.008)(0.157±0.008)
Unit mm(inch)
4.0±0.2
(0.157±0.008)
4.0±0.2
(0.157±0.008)
1.1±0.2
2.5±0.2
(0.043±0.008) (0.098±0.008)
1.8 max
(0.071 max)
2.6 max
(0.102 max)
*1)4.2max
8.0±0.2
8.0±0.2
(0.165max)
1.6±0.3
5.6±0.3
NR 8040
(0.315±0.008) (0.315±0.008) *2)4.0max (0.063±0.012) (0.220±0.012)
(0.157max)
*1)0R9~6R8タイプ
*2)100~101タイプ
Unit mm(inch)
推奨ランドꢀRecommended Land Patterns
【NR3010, NR3012, NR3015】 【NR4010, NR4012, NR4018, NRG4026】 【NR6012,NR6020,NR6028,NR6045】
2.2 2.8 4.7
【NR8040】
5.6
2.7
3.7
5.7
7.5
0.8
0.8
1.2
1.2
1.6
1.6
1.8
1.8
概略バリエーションꢀAVAILABLE INDUCTANCE RANGE
Type
NR3010
NR3012
NR3015
NR4010
NR4012
NR4018
NR6012
NR6020
NR6028
NR6045
NR8040
NRG4026
Range
Ima[x mA] Rdc±20%[Ω]Ima[x mA] Rdc±20%[Ω]Ima[x mA] Rdc±20%[Ω]Ima[x mA] Rdc±20%[Ω]Ima[x mA] Rdc±20%[Ω]Ima[x mA] Rdc±20%[Ω]Ima[x mA] Rdc±20%[Ω]Ima[x mA] Rdc±30%[Ω]Ima[x mA] Rdc±30%[Ω]Ima[x mA] Rdc±30%[Ω]Ima[x mA] Rdc±30%[Ω]Ima[x mA] Rdc±30%[Ω]
0.8
3800
0.020
1300
0.065 1490
0.05 2100
0.030 1050
0.100 1500
0.060 1830
0.030
4600
0.013 4200
0.014 7800
0.006 2300
0.03
1.0
3.3
1730
0.095
500
220
0.450 540
2.05 250
0.290 700
1.45 320
0.230 560
1.34 240
0.380 740
1.81 350
0.240 840
1.00
0.180 1000
0.240 1400
950
0.125 1900
0.290
0.065 2500
0.600 700
0.047 3100
0.500 1000
0.034
0.290
1300
650
0.085
0.300
10
47
320
2.18
620
100
220
170
4.00
セレクションガイド
アイテム一覧
特性図
梱包
Packaging
信
頼性
使用上の注意
Selection Guide
Part Numbers
Electrical Characteristics
Reliability Data
Precautions
P.14
etc
P.344
P.348
P.353
P.366
P.374
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
343
△
△
アイテム一覧ꢀPART NUMBERS
NR 3010シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
EHS
公ꢀꢀ称
インダクタンス
許容差
Rated current
周
波 数
形ꢀꢀ名
DC
周
波数
〔mA〕
(Environmental インダクタンス
Self-resonant
frequency
〔MHz〕
(min.)
Resistance
〔Ω〕
Measuring
frequency
〔kHz〕
Hazardous
Inductance Inductance
直
流重 畳許容電流 温度上昇許容電流
Ordering code
Saturation current Temperature rise current
Substances)
[μH]
Tolerance
(±20%)
Idc1
1,300
1,200
1,100
870
750
610
500
400
Idc2
1,400
1,300
1,100
940
NR 3010T 1R0N
NR 3010T 1R5N
NR 3010T 2R2M
NR 3010T 3R3M
NR 3010T 4R7M
NR 3010T 6R8M
NR 3010T 100M
NR 3010T 150M
NR 3010T 220M
NR 3010T 330M
NR 3010T 470M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
126
98
82
63
56
46
35
30
25
20
17
0.065
0.080
0.095
0.140
0.190
0.300
0.450
0.740
1.03
±30%
780
630
510
400
100
±20%
350
350
1.55
260
275
2.05
220
235
NR 3012シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
公ꢀꢀ称
インダクタンス
Inductance Inductance
インダクタンス
許容差
EHS
Rated current
周
波 数
Self-resonant
frequency
〔MHz〕
(min.)
形ꢀꢀ名
DC
周
波数
〔mA〕
(Environmental
Resistance
〔Ω〕
Measuring
frequency
〔kHz〕
直
流重 畳許容電流 温度上昇許容電流
Hazardous
Ordering code
Saturation current Temperature rise current
[μH]
Tolerance
Substances)
(±20%)
Idc1
1,500
1,360
1,100
910
770
670
540
440
Idc2
1,490
1,400
1,200
1,050
980
NR 3012T 1R0N
NR 3012T 1R5N
NR 3012T 2R2M
NR 3012T 3R3M
NR 3012T 4R7M
NR 3012T 6R8M
NR 3012T 100M
NR 3012T 150M
NR 3012T 220M
NR 3012T 330M
NR 3012T 470M
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
110
92
70
55
48
40
32
27
22
19
17
0.050
0.060
0.080
0.100
0.130
0.190
0.290
0.450
0.630
1.03
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
±30%
740
630
485
420
100
±20%
375
310
330
1.45
250
280
NR 3015シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
EHS
公ꢀꢀ称
インダクタンス
Inductance Inductance
インダクタンス
許容差
Rated current
周
波 数
Self-resonant
frequency
〔MHz〕
(min.)
形ꢀꢀ名
DC
周
波数
(Environmental
〔mA〕
Resistance
〔Ω〕
Measuring
frequency
〔kHz〕
Hazardous
直
流重 畳許容電流 温度上昇許容電流
Ordering code
Saturation current Temperature rise current
Substances)
[μH]
Tolerance
(±20%)
Idc1
2,100
1,800
1,480
1,210
1,020
870
Idc2
2,100
1,820
1,500
1,230
1,040
880
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
NR 3015T 1R0N
NR 3015T 1R5N
NR 3015T 2R2M
NR 3015T 3R3M
NR 3015T 4R7M
NR 3015T 6R8M
NR 3015T 100M
NR 3015T 150M
NR 3015T 220M
NR 3015T 330M
NR 3015T 470M
1.0
1.5
2.2
3.3
4.7
6.8
10
15
22
33
47
100
87
64
49
40
36
28
23
20
18
17
0.030
0.040
0.060
0.080
0.120
0.160
0.230
0.360
0.520
0.840
1.34
±30%
100
±20%
700
710
560
560
470
470
390
370
320
300
※)直
流重 畳許容電流(Idc1) は、直流重 畳によるインダクタンス低下が 30% 以内となる直流電流値 (at 20℃ )
※)The saturation current value(Idc1) is the DC current value having inductance decrease down to 30%.(at 20℃ )
※)温度上昇許容電流(Idc2) は、温度上昇が 40℃となる直流電流値 (at 20℃ )
※)The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃ .(at 20℃ )
※)定格電流値 は直流重 畳許容電流、または温度上昇許容電流をいずれも満足する直流電流値
※)The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
344
△
△
アイテム一覧ꢀPART NUMBERS
NR 4010シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
EHS
公ꢀꢀ称
インダクタンス
Inductance Inductance
インダクタンス
許容差
Rated current
周
波 数
形ꢀꢀ名
DC
周
波数
(Environmental
〔mA〕
Self-resonant
frequency
〔MHz〕
(min.)
Resistance
〔Ω〕
Measuring
frequency
〔kHz〕
Hazardous
直
流重 畳許容電流 温度上昇許容電流
Ordering code
Saturation current Temperature rise current
Substances)
[μH]
Tolerance
(±20%)
Idc1
1,800
1,150
1,100
900
740
560
470
360
Idc2
1,050
890
820
750
620
600
510
400
300
280
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
NR 4010T 1R0N
NR 4010T 2R2N
NR 4010T 3R3M
NR 4010T 4R7M
NR 4010T 6R8M
NR 4010T 100M
NR 4010T 150M
NR 4010T 220M
NR 4010T 330M
NR 4010T 470M
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
116
73
58
47
38
31
24
19
15
13
0.100
0.150
0.180
0.210
0.300
0.380
0.510
0.870
1.54
±30%
100
±20%
5
280
1.81
240
NR 4012シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
EHS
公ꢀꢀ称
インダクタンス
Inductance Inductance
[μH]
インダクタンス
許容差
Rated current
周
波 数
Self-resonant
frequency
〔MHz〕
(min.)
形ꢀꢀ名
DC
周
波数
(Environmental
〔mA〕
Resistance
〔Ω〕
Measuring
frequency
〔kHz〕
Hazardous
直
流重 畳許容電流 温度上昇許容電流
Ordering code
Saturation current Temperature rise current
Substances)
Tolerance
(±20%)
Idc1
2,500
1,650
1,200
1,050
900
Idc2
1,500
1,200
980
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
NR 4012T 1R0N
NR 4012T 2R2M
NR 4012T 3R3M
NR 4012T 4R7M
NR 4012T 6R8M
NR 4012T 100M
NR 4012T 150M
NR 4012T 220M
NR 4012T 330M
NR 4012T 470M
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
131
66
50
45
35
28
23
18
15
12
0.060
0.090
0.130
0.140
0.180
0.240
0.400
0.480
0.810
1.00
960
840
100
±20%
740
770
560
600
510
540
400
420
350
370
NR 4018シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
EHS
公ꢀꢀ称
インダクタンス
Inductance Inductance
[μH]
インダクタンス
許容差
Rated current
周
波 数
Self-resonant
frequency
〔MHz〕
(min.)
形ꢀꢀ名
DC
周
波数
(Environmental
〔mA〕
Resistance
〔Ω〕
Measuring
frequency
〔kHz〕
Hazardous
直
流重 畳許容電流 温度上昇許容電流
Ordering code
Saturation current Temperature rise current
Substances)
Tolerance
(±20%)
Idc1
4,000
2,700
2,000
1,700
1,450
1,200
940
800
650
570
470
Idc2
1,830
1,440
1,230
1,200
1,060
840
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
NR 4018T 1R0N
NR 4018T 2R2M
NR 4018T 3R3M
NR 4018T 4R7M
NR 4018T 6R8M
NR 4018T 100M
NR 4018T 150M
NR 4018T 220M
NR 4018T 330M
NR 4018T 470M
NR 4018T 680M
NR 4018T 101M
NR 4018T 151M
NR 4018T 221M
1.0
2.2
3.3
4.7
6.8
10
15
22
33
47
±30%
80
52
44
34
29
24
19
16
12
10
8.3
6.5
5.5
4.0
0.030
0.060
0.070
0.090
0.110
0.180
0.250
0.360
0.530
0.650
1.00
650
590
490
420
100
±20%
68
320
100
150
220
1.50
400
270
2.50
310
220
4.00
270
170
※)直
流重 畳許容電流(Idc1) は、直流重 畳によるインダクタンス低下が 30% 以内となる直流電流値 (at 20℃ )
※)The saturation current value(Idc1) is the DC current value having inductance decrease down to 30%.(at 20℃ )
※)温度上昇許容電流(Idc2) は、温度上昇が 40℃となる直流電流値 (at 20℃ )
※)The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃ .(at 20℃ )
※)定格電流値 は直流重 畳許容電流、または温度上昇許容電流をいずれも満足する直流電流値
※)The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
345
△
△
アイテム一覧ꢀPART NUMBERS
NR 6012シールドタイプꢀShielded type
定格電流 ※)
直流抵抗 測定
Rated current
自己共振
EHS
公ꢀꢀ称
インダクタンス
Inductance Inductance
[μH]
インダクタンス
許容差
周
波 数
形ꢀꢀ名
DC
周
波数
(Environmental
〔mA〕
Self-resonant
frequency
〔MHz〕
(min.)
Resistance
〔Ω〕
Measuring
frequency
〔kHz〕
Hazardous
直
流重 畳許容電流 温度上昇許容電流
Ordering code
Saturation current Temperature rise current
Substances)
Tolerance
(±20%)
Idc1
2,100
1,800
1,500
1,300
1,000
800
Idc2
1,730
1,570
1,400
1,180
1,000
790
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
NR 6012T 2R5NE
NR 6012T 4R0NE
NR 6012T 5R3ME
NR 6012T 6R8ME
NR 6012T 100ME
NR 6012T 150ME
NR 6012T 220ME
NR 6012T 330ME
NR 6012T 470ME
NR 6012T 680ME
NR 6012T 101ME
2.5
4.0
5.3
6.8
10
15
22
33
47
45
39
34
30
22
18
12
8
0.090
0.105
0.110
0.165
0.235
0.330
0.530
0.700
1.05
±30%
100
±20%
760
630
590
530
6
3
1
520
460
68
100
1.35
440
410
2.18
350
320
NR 6020 シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
Rated current
EHS
公称
インダクタンス
周
波数
Self-resonant
frequency
[MHz]
min
形名
DC
周
波数
[mA]
(Environmental インダクタンス
Hazardous
Substances)
許容差
Resistance
[Ω]
(±30%)
Measuring
frequency
[kHz]
Inductance Inductance
[μH]
直
流重 畳飽和電流
温度上昇電流
Ordering code
Tolerance
Saturation current Temperature rise current
(Idc1)
5,500
4,000
3,200
2,800
2,400
2,000
1,700
1,050
(Idc2)
3,800
3,200
2,700
2,600
2,000
1,800
1,400
950
NR 6020T 0R8N
NR 6020T 1R5N
NR 6020T 2R2N
NR 6020T 3R3N
NR 6020T 4R7N
NR 6020T 6R8N
NR 6020T 100M
NR 6020T 220M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
0.8
1.5
2.2
3.3
4.7
6.8
10
110
93
73
55
43
30
18
11
0.020
0.026
0.034
0.040
0.058
0.085
0.125
0.290
±30%
±20%
100
22
NR 6028シールドタイプꢀShielded type
定格電流 ※)
測定
直
Rated current
自己共振
EHS
流抵抗
DC
公ꢀꢀ称
インダクタンス
Inductance Inductance
[μH]
インダクタンス
許容差
周
波 数
Self-resonant
frequency
〔MHz〕
(min.)
形ꢀꢀ名
周
波数
(Environmental
〔mA〕
Measuring
frequency
〔kHz〕
Resistance
〔Ω〕
Hazardous
直
流重 畳許容電流 温度上昇許容電流
Ordering code
Saturation current Temperature rise current
Substances)
Tolerance
(±30%)
(⊿L/L≦-30%)
6,600
5,000
4,200
3,600
2,700
2,500
1,900
1,600
1,300
1,100
950
(⊿T≦40℃)
4,600
4,200
3,700
3,400
3,000
2,500
1,900
1,800
1,400
1,100
920
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
NR 6028T 0R9N
NR 6028T 1R5N
NR 6028T 2R2N
NR 6028T 3R0N
NR 6028T 4R7M
NR 6028T 6R0M
NR 6028T 100M
NR 6028T 150M
NR 6028T 220M
NR 6028T 330M
NR 6028T 470M
NR 6028T 680M
NR 6028T 101M
0.9
1.5
2.2
3.0
4.7
6.0
10
15
22
33
47
90
78
68
55
39
30
20
17
12
10
8
0.013
0.016
0.020
0.023
0.031
0.040
0.065
0.095
0.135
0.220
0.300
0.420
0.600
±30%
100
±20%
68
100
5
3
760
770
620
660
※)直
流重 畳許容電流(Idc1) は、直流重 畳によるインダクタンス低下が 30% 以内となる直流電流値 (at 20℃ )
※)The saturation current value(Idc1) is the DC current value having inductance decrease down to 30%.(at 20℃ )
※)温度上昇許容電流(Idc2) は、温度上昇が 40℃となる直流電流値 (at 20℃ )
※)The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃ .(at 20℃ )
※)定格電流値 は直流重 畳許容電流、または温度上昇許容電流をいずれも満足する直流電流値
※)The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
346
△
△
アイテム一覧ꢀPART NUMBERS
NR 6045 シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
EHS
公称
インダクタンス
許容差
Rated current
周
波数
Self-resonant
frequency
[MHz]
min
形名
DC
周波数
[mA]
(Environmental インダクタンス
Resistance
Measuring
Hazardous
Substances)
Inductance Inductance
直
流重 畳飽和電流
温度上昇電流
Ordering code
[Ω]
(±30%)
frequency
[kHz]
Saturation current Temperature rise current
[μH]
Tolerance
(Idc1)
8,500
8,000
7,000
6,000
5,000
4,000
3,800
3,000
2,300
1,900
1,500
1,300
1,000
800
(Idc2)
4,200
4,000
3,700
3,500
3,200
3,000
2,800
2,500
1,900
1,500
1,400
1,100
900
NR 6045T 1R0N
NR 6045T 1R3N
NR 6045T 1R8N
NR 6045T 2R3N
NR 6045T 3R0N
NR 6045T 4R5M
NR 6045T 6R3M
NR 6045T 100M
NR 6045T 150M
NR 6045T 220M
NR 6045T 330M
NR 6045T 470M
NR 6045T 680M
NR 6045T 101M
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
1.0
1.3
1.8
2.3
3.0
4.5
6.3
10
15
22
33
47
110
95
80
60
45
25
15
12
10
7
0.014
0.016
0.018
0.021
0.024
0.031
0.038
0.047
0.077
0.115
0.145
0.220
0.330
0.500
±30%
5
100
±20%
6
5
4
3
68
100
700
NR 8040シールドタイプꢀShielded type
定格電流 ※)
自己共振
測定
EHS
直
流抵抗
公ꢀꢀ称
インダクタンス
Inductance Inductance
[μH]
インダクタンス
許容差
Rated current
周
波 数
Self-resonant
frequency
〔MHz〕
(min.)
形ꢀꢀ名
周
波数
DC
(Environmental
〔mA〕
Measuring
frequency
〔kHz〕
Resistance
〔Ω〕
(±30%)
Hazardous
直
流重 畳許容電流 温度上昇許容電流
Ordering code
Saturation current Temperature rise current
Substances)
Tolerance
Idc1
11,000
9,000
7,400
5,300
4,700
4,000
3,400
2,700
2,200
1,900
1,500
1,200
1,000
Idc2
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
RoHS
NR 8040T 0R9 N
NR 8040T 1R4N
NR 8040T 2R0N
NR 8040T 3R6N
NR 8040T 4R7N
NR 8040T 6R8N
NR 8040T 100M
NR 8040T 150M
NR 8040T 220M
NR 8040T 330M
NR 8040T 470M
NR 8040T 680M
NR 8040T 101M
0.9
1.4
2.0
3.6
4.7
6.8
10
15
22
33
47
85
63
50
34
30
24
22
16
13
12
8
0.006
0.007
0.009
0.015
0.018
0.025
0.034
0.050
0.066
0.100
0.150
0.230
0.290
7,800
7,000
6,300
4,900
4,100
3,700
3,100
2,400
2,200
1,700
1,400
1,100
1,000
±30%
100
±20%
68
100
7
6
NRG4026 シールドタイプꢀShielded type
定格電流 ※)
自己共振
直
流抵抗
測定
Rated current
公称
インダクタンス
Inductance Inductance
インダクタンス
周
波数
Self-resonant
frequency
[MHz]
min
形名
DC
周
波数
[mA]
許容差
Resistance
[Ω]
Measuring
frequency
[kHz]
直
流重 畳飽和電流
温度上昇電流
Ordering code
Saturation current Temperature rise current
[μH]
Tolerance
(±30%)
(Idc1)
(Idc2)
NRG4026 T 1R2N
NRG4026 T 2R3N
NRG4026 T 3R5M
NRG4026 T 4R7M
NRG4026 T 6R6M
NRG4026 T 100M
NRG4026 T 150M
NRG4026 T 220M
NRG4026 T 330M
NRG4026 T 470M
1.2
2.3
3.5
4.7
6.6
10
15
22
33
47
120
96
58
46
33
26
19
13
9
0.030
0.040
0.050
0.055
0.065
0.085
0.110
0.165
0.200
0.300
3,100
2,100
1,800
1,450
1,300
1,000
900
610
540
410
2,300
1,970
1,700
1,600
1,500
1,300
1,100
900
±30%
100
±20%
800
650
6
※)直
流電流許容電流(Idc1) は、直流重 畳によるインダクタンス低下が 30% 以内となる直流電流値 (at 20℃ )
※)The saturation current(Idc1) is DC current value Inductance decrease down to 30%.(at 20℃ )
※)温度上昇許容電流(Idc2) は、温度上昇が 40℃となる直
流電流値 (at 20℃ )
※)The temperature rise current value(Idc2) is the DC current value having temperature increase up to 40℃ .(at 20℃ )
※)定格電流は Idc2 です。
※)The rated current is Idc2.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
347
△
△
特性図ꢀELECTRICAL CHARACTERISTICS
流重 畳特性例ꢀDC Bias characteristics(Measured by HP4285A)
NR 3010
NR 3012
NR 3015
NR 4010
100
10
1
100
10
1
100
10
1
100
470M
470M
470M
220M
100M
470M
220M
100M
220M
100M
220M
100M
10
4R7M
2R2M
4R7M
2R2M
4R7M
2R2M
4R7M
2R2N
1
10
10
100
1,000
10,000
10
100
1,000
10,000
10
100
1,000
10,000
100
1,000
10,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
NR 4012
NR 4018
NR 6012(E Type)
NR 6020
100
10
100
1000
100
10
1000
470M
220M
100M
221M
100
101M
101M
470M
220M
220M
100M
470M
220M
4R7M
2R2M
10
1
10
100M
5R3M
100M
4R7M
4R7M
2R2M
0R8N
2R2M
0.1
10
1
10
1
10
1
10
100
1,000
10,000
100
1,000
10,000
100
1,000
10,000
100
1,000
10,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
NR 6028
NR 8040
NR 6045
NRG 4026
100
1000
100
10
1000
100
10
1000
100
10
470M
101M
101M
470M
220M
101M
220M
100M
470M
470M
220M
220M
100M
10
100M
4R7N
100M
4R5N
4R7
2R2
0R9
2R0N
0R9N
2R3N
1R0N
4R7M
2R3N
1
1
1
0.1
1
10
0.1
10
0.1
10
10
100
1,000
10,000
100
1,000
10,000
100
1,000
10,000
100,000
100
1,000
10,000
100,000
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
DC Bia〔s mA〕
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
348
△
△
梱包ꢀPACKAGING
①最小受注単位数 Minimum Quantity
(2)エンボステープ(12mm 幅)Embossed tape(0.47 inches wide)
標準数量[個
]
形式
Type
Standard Quantity[pcs]
+0.1
ー0
チップ装入部
φ1.5
1.75±0.1
CHIP cavity
K
+0.004
ー0
テーピング
Tape & Reel
2000
(0.059
)
(0.069±0.004)
T
NR 3012
NR 3015
NR 4010
NR 4012
NR 4018
NR 6012
NR 6020
NR6028
NR 6045
NR 8040
A
2000
5000
4500
3500
1000
2500
2000
1500
電極位置(裏面
)
F
Electrode(bottom view)
5
2.0±0.1
4.0±0.1
(0.079±0.004)(0.157±0.004)
チップ挿入部
挿入ピッチ
Insertion
pitch
テープ厚
み
1000
形式
Type
Chip cavity
Tape thickness
A
B
F
T
K
②テーピング材質 Tape Material
4.3±0.1
4.3±0.1
8.0±0.1
0.3±0.05
1.4±0.1
NR 4010 (0.169±0.004)(0.169±0.004)(0.315±0.004)(0.012±0.002)(0.055±0.004)
4.3±0.1
4.3±0.1
8.0±0.1
0.3±0.05
1.6±0.1
NR 4012 (0.169±0.004)(0.169±0.004)(0.315±0.004)(0.012±0.002)(0.063±0.004)
4.3±0.1
4.3±0.1
8.0±0.1
0.3±0.05
2.1±0.1
NR 4018 (0.169±0.004)(0.169±0.004)(0.315±0.004)(0.012±0.002)(0.083±0.004)
4.3±0.1
4.3±0.1
8.0±0.1
0.3±0.05
3.1±0.1
NRG 4026
(0.169±0.004)(0.169±0.004)(0.315±0.004)(0.012±0.002)(0.122±0.004)
6.3±0.1
6.3±0.1
8.0±0.1
0.4±0.1
1.6±0.1
NR 6012(0.248±0.004)(0.248±0.004)(0.315±0.004)(0.016±0.004)(0.063±0.004)
6.3±0.1
6.3±0.1
8.0±0.1
0.4±0.1
2.3±0.1
NR 6020(0.248±0.004)(0.248±0.004)(0.315±0.004)(0.016±0.004)(0.090±0.004)
6.3±0.1
6.3±0.1
8.0±0.1
0.4±0.1
3.1±0.1
NR 6028
(0.248±0.004) (0.248±0.004) (0.315±0.004) (0.016±0.004) (0.122±0.004)
6.3±0.1
6.3±0.1
8.0±0.1
0.4±0.1
4.7±0.1
NR 6045(0.248±0.004)(0.248±0.004)(0.315±0.004)(0.016±0.004)(0.185±0.004
)
Unit:mm(inch)
(3)エンボステープ(16mm 幅)Embossed tape(0.63 inches wide)
2.0±0.1
(0.079±0.004)
4.0±0.1
K
(0.157±0.004)
チップ装入部
CHIP cavity
F
φ1.5±0.1
(0.059±0.004)
1.75±0.1
(0.069±0.004)
T
③テーピング寸法 Taping dimensions
(1)エンボステープ(8mm 幅)Embossed tape(0.315 inches wide)
7.5±0.1
(0.295±0.004)
A
電極位置(裏面
)
Electrode(bottom view)
+0.1
ー0
チップ装入部
CHIP cavity
φ1.5
1.75±0.1
K
+0.004
ー0
(0.069±0.004)
(0.059
)
T
チップ挿入部
Chip cavity
挿入ピッチ
テープ厚
み
形ꢀ式
A
Insertion pitch
Tape thickness
Type
A
B
F
T
K
8.3 ± 0.1 8.3 ± 0.1 12.0 ± 0.1 0.5 ± 0.1 4.5 ± 0.1
NR 8040 (0.327 ± 0.004)
(0.327 ± 0.004)(0.472 ± 0.004)(0.020 ± 0.004)(0.177 ± 0.004)
電極位置(裏面
)
F
Electrode(bottom view)
2.0±0.05
4.0±0.1
Unit:mm(inch)
(0.079±0.002)(0.157±0.004)
チップ挿入部
Chip cavity
挿入ピッチ
Insertion pitch
テープ厚
Tape thickness
み
形ꢀ式
Type
A
B
F
T
K
3.2 ± 0.1 3.2 ± 0.1 4.0 ± 0.1 0.3 ± 0.05 1.4 ± 0.1
NR 3010 (0.126 ± 0.004)
(0.126 ± 0.004)(0.157 ± 0.004)(0.012 ± 0.002)(0.055 ± 0.004)
3.2 ± 0.1 3.2 ± 0.1 4.0 ± 0.1 0.3 ± 0.05 1.6 ± 0.1
NR 3012 (0.126 ± 0.004)
(0.126 ± 0.004)(0.157 ± 0.004)(0.012 ± 0.002)(0.063 ± 0.004)
3.2 ± 0.1 3.2 ± 0.1 4.0 ± 0.1 0.3 ± 0.05 1.9 ± 0.1
NR 3015 (0.126 ± 0.004)
(0.126 ± 0.004)(0.157 ± 0.004)(0.012 ± 0.002)(0.075 ± 0.004)
Unit:mm(inch)
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
353
△
△
梱包ꢀPACKAGING
④リーダー部・空部 Leader and Blank portion
(1)NR 3010, NR 3012, NR 3015
⑤リール寸法 Reel size
W
2±0.5
空部
Blank portions
チップ装着
部
リーダー部
Leader
Chip cavity
φ13±0.5
2.5以下
(0.098inches
or Less)
280mm以上
(11.0 inches or more)
600mm~700mm
(23.6 inches to 27.6 inches)
リール寸法 Reel size〔mm〕
(参考値 Reference values)
形ꢀ式
Type
1400mm~1600mm
(55.1 inches to 63.0 inches)
φD
φd
w
引き出し方向
180±0.5
60±1.0
10.0±1.5
Direction of tape feed
NR 3010
NR 3012
(7.087±0.019)(2.36±0.04)(0.394±0.059)
180±0.5 60±1.0 10.0±1.5
(7.087±0.019)(2.36±0.04)(0.394±0.059)
180±0.5 60±1.0 10.0±1.5
(7.087±0.019)(2.36±0.04)(0.394±0.059)
180±3.0 60±2.0 14.0±1.5
(7.087±0.019)(2.36±0.08)(0.551±0.059)
(2)NR 4010, NR 4012, NR 4018
空部
チップ装着
部
リーダー部
Leader
NR 3015
NR6012
Blank portions
Chip cavity
Unit:mm(inch)
280mm以上
(11.0 inches or more)
1100mm~1200mm
(43.3 inches to 47.2 inches)
W
2000mm~2200mm
(78.7 inches to 86.6 inches)
2±0.5
引き出し方向
Direction of tape feed
φ13±0.5
(3)NR 6012
空部
Blank portions
チップ装着
部
リーダー部
Leader
Chip cavity
t
リール寸法ꢀ Reel size[mm]
(参考値 ꢀReference values)
形式
Type
80mm以上
(3.14 inches or more)
104mm~136mm
(4.09 inches to 5.35 inches)
φD
330±3.0
φd
80±2.0
t(max)
18.5
w
13.5±1.0
(0.531±0.04)
13.5±1.0
408mm~536mm
NR4010
NR4012
NR4018
NRG4026
NR6020
NR6028
NR6045
NR8040
(16.1 inches to 21.1 inches)
(12.99±0.118)(3.15±0.078) (0.72)
330±3.0 80±2.0 18.5
(12.99±0.118)(3.15±0.078) (0.72)
330±3.0 80±2.0 18.5
(12.99±0.118)(3.15±0.078) (0.72)
330±3.0 80±2.0 18.5
(12.99±0.118)(3.15±0.078) (0.72)
330±3.0 80±2.0 18.5
(12.99±0.118)(3.15±0.078) (0.72)
引き出し方向
Direction of tape feed
(0.531±0.04)
13.5±1.0
(0.531±0.04)
13.5±1.0
(4)NR 6020, NR 6028, NR 6045, NR 8040
(0.531±0.04)
13.5±1.0
空部
空部
Blank portions
チップ装着
部
リーダー部
Leader
Blank portions
Chip cavity
(0.531±0.04)
13.5±1.0
330±3.0
(12.99±0.118) (3.15±0.078)
330±3.0 80±2.0
80±2.0
18.5
(0.72)
18.5
(0.531±0.04)
13.5±1.0
160mm以上
100mm以上
(6.3inches or more)
(12.99±0.118)(3.15±0.078) (0.72)
330±3.0 80±2.0 22.5
(12.99±0.118)(3.15±0.078) (0.89)
(0.531±0.04)
17.5±1.0
(6.3inches or more)
(0.689±0.04)
Unit : mm(inch)
400mm以上
(15.75inches or more)
引き出し方向
⑥トップテープ強度ꢀTop Tape Strength
Direction of tape feed
トップテープのはがし力は、下図矢印方向にて0.1~0.7Nとなります。
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the
arrow as illus trated below.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
354
△
△
RELIABILITY DATAꢀ
1/4
Specifled Value
Item
BRC1608, BRL2012, BRC2016,
BRL2518, BRL3225
Type
Test Method and Remarks
NRH24, NR30/40/60/80,
NRG40 Type
NR10050 Type
-25℃~+105℃
-25℃~+120℃
-25℃~+105℃
1.Operating Temperature
Range
Including self-generated heat
-40℃~+85℃
2.Storage Temperature
Range
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type,
NRH24, NR30/40/60/80, NRG4026Type :0 to 40℃ for the product with taping.
NR10050 Type:0 ~40℃ for the product with taping.
Within the specified tolerance
The maximum DC value having inductance decrease
within specified value and temperature increase within
40℃ by the application of DC bias.
3.Rated current
5
Inductance decrease
BRC1608,BRL2012,BRC2016,BRL2518, BRL3225Type,
ꢀ
NRH24, NR30/40/60/80,NRG40Type, NR10050Type
30%
Within the specified tolerance
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type
LCR Meter:HP 4285A or equivalent, Measuring frequency:Specified frequency
NRH24, NR30/40/60/80, NRG4026Type :
4.Inductance
LCR Meter:HP 4285A or equivalent, 100KHz, 1V
NR10050Type:LCR Meter:HP 4263A or equivalent, 100KHz, 1V
DC ohmmeter:HIOKI 3227 or equivalent
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type,
NRH24, NR30/40/60/80Type, NR10050Type:
Within the specified tolerance
Within the specification
5.DC Resistance
6.Self resonance frequency
Inpedance analyzer/material analyzer:HP4291A or equivalent
HP4191A, 4192A or equivalent
BRL2012, BRC2016,
BRL2518, BRL3225
Inductance change:
Inductance change:
Within±20%
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type,
NRH24, NR30/40/60/80, NRG4026Type , NR10050Type:
Measurement of inductance shall be taken at temperature
range within -25℃~+85℃.
7.Temperature characteristic
Within±15%
With reference to inductance value at +20℃., change rate
shall be calculated.
BRC1608
Inductance change:
Within±20%
Change of maximum inductance deviation in step 1 to 5
Temperature at step 1
Temperature at step 2
20℃
Minimum operating
temperature
Temperature at step 3
Temperature at step 4
20℃(Standard temperature)
Maximum oparating
temperature
Temperature st step 5
20℃
8.Resistance to flexure of
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type,
NRH24, NR30/40/60/80, NRG4026Type :
No damage.
substrate
The test samples shall be soldered to the test board by the reflow .
As illustrated below, apply force in the direction of the arrow
indicating until deflection of the test board reaches to 2 mm.
Test board size:100×40×1.0 Test board material:glass epoxy-resin
Solder cream thickness:0.15(BR Series)
0.10(NR Series)
Land dimension(BRC1608)
Land dimension(BRC2016)
1.0
1.8
0.8
0.55
0.55
0.7 0.8 0.7
Land dimension(BRL2012)
Land dimension(BRL2518)
1.95
1.4
0.9
0.65 1.5 0.65
0.65
0.65
Land dimension(NRH24)
Land dimension(BRL3225)
2.4
2.7
0.8 0.8 0.8
1.0 1.6 1.0
Land dimension(NR40)
Land dimension(NR30)
3.7
2.7
1.2 1.6 1.2
0.8 1.4 0.8
Land dimension(NR80)
Land dimension(NR60)
7.5
5.7
1.8 3.8 1.8
1.15 3.7 1.15
Force Rod
20
10
R230
Board
Printed board thickness: 1.0mm
Test Sample
R5
45±2mm
45±2mm
Unit:mm
9.Insulation resistance:
between wires
10.Insulation resistance:
ꢀ
between wire and core
11.Withstanding voltage:
between wires and core
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
367
△
△
RELIABILITY DATAꢀ
2/4
Specifled Value
12.Adhesion of terminal
Item
BRC1608, BRL2012, BRC2016,
Test Method and Remarks
electrode
NRH24, NR30/40/60/80,
NRG40 Type
BRL2518, BRL3225
NR10050 Type
Type
Shall not come off PC board.
BRC1608,BRL2012,BRC2016,BRL2518,
BRL3225Type, NRH24, NR30/40/60/80, NRG40Type:
The test samples shall be soldered to the test board by
the reflow.
pplied force:10N to X and Y directions. Duration:5s.
Solder cream thickness:0.15mm.
5
10N, 5s
NR10050Type:
Applied force:5N to X and Y directions. Duration:5s.
Inductance change:Within±10%
BRC1608,BRL2012,BRC2016,BRL2518,
BRL3225Type, NRH24, NR30/40/60/80, NRG40Type,
NR10050Type:
13.Resistance to vibration
No significant abnormality in appearance.
The test samples shall be soldered to the test board by
the reflow.
Then it shall be submitted to below test conditions.
Frequency Range 10~55Hz
1.5mm(May not exceed
Total Amplitude
acceleration 196 m/S2)
Sweeping Method 10Hz to 55Hz to 10 Hz for 1 min.
X
For 2 hours on each X,
Time
Y
Z
Y, and Z axis.
Recovery:At least 2hrs of recovery under the standard con-
dition sfter the test, followed by the measurement within 48 hrs.
14.Solderability
BRC1608,BRL2012,BRC2016,BRL2518,
BRL3225Type, NRH24, NR30/40/60/80, NRG40Type,
NR10050Type:
At least 90%of surface of terminal electrode is
covered by new solder.
The test samples shall be dipped in flux, and then im-
mersed in molten solder as shown in below tableꢀ
Flux:Methanol solution containing rosin 25%.
NRH24, NR30/40/60/80Type,NR10050 Type :
Solder Temperature
Time
245±5℃
5±1.0sec
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type:
Solder Temperature
Time
245±5℃
5±0.5sec
※Immersion depth:All sides of mounting terminal shall
be immersed.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
369
△
△
RELIABILITY DATAꢀ
3/4
Specifled Value
Item
BRC1608, BRL2012, BRC2016,
Test Method and Remarks
NRH24, NR30/40/60/80,
NRG40 Type
BRL2518, BRL3225
NR10050 Type
Type
Inductance change:Within±10%
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type :
3 times of reflow oven at 230℃MIN for 40 sec. with
15.Resistance to soldering
No significant abnormality in appearance.
heat
at 260 +-05 ℃ for 5 sec.
peak temperature
NRH24, NR30/40/6012・6028・6045/80,
NRG40Type, NR10050 Type:
5
The test sample shall be exposed to reflow oven at 230±
5℃ for 40 seconds, with peak temperature at 260±5℃
for 5 seconds, 2 times.
NR6020Type:
The test sample shall be exposed to reflow oven at 230±
+5
5℃ for 40 seconds, with peak temperature at 250
for 5 seconds, 2 times.
℃
-0
Test board thickness:1.0 mm
Test board material : glass epoxy-resin
Inductance change:Within±10%
BRC1608,BRL2012,BRC2016,BRL2518,
16.Thermal shock
No significant abnormality in appearance.
BRL3225Type, NRH24, NR30/40/60/80, NRG40Type,
NR10050 Type:
The test samples shall be soldered to the test board
by the reflow. The test samples shall be placed at
specified temperature for specified time by step 1
to step 4 as shown in below table in sequence. The
temperature cycle shall be repeated 100 cycles.
Conditions of 1 cycle
Step
Temperature(℃) Duration(min)
1
2
3
4
-40±3
Room temperature
+85±2
30±3
Within 3
30±3
Room temperature
Within 3
Inductance change:Within±10%
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type:
17.Damp heat
No significant abnormality in appearance.
Temperature
Humidity
Time
60±2℃
90~95%RH
1000 hours.
Recovery: At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
NRH24, NR30/40/60/80, NRG40Type:
The test samples shall be soldered to the test board by
the reflow.
The test samples shall be placed in thermostatic oven set
at specified temperature and humidity as shown in below
table.
Temperature
Humidity
Time
60±2℃
90~95%RH
500±24hour
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
371
△
△
RELIABILITY DATAꢀ
4/4
Specifled Value
Item
BRC1608, BRL2012, BRC2016,
Test Method and Remarks
NRH24, NR30/40/60/80,
NRG40 Type
BRL2518, BRL3225
NR10050 Type
Type
Inductance change:Within±10%
18.Loading under damp
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type:
No significant abnormality in appearance.
Temperature
Humidity
60±2℃
heat
90~95%RH
Rated current
1000hours.
Applied current
Time
Recovery: At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
5
NRH24, NR30/40/60/80, NRG40Type, NR10050 Type:
The test samples shall be soldered to the test board
by the reflow.
The test samples shall be placed in thermostatic oven
set at specified temperature and humidity and applied
the rated current continuously as shown in below
table.
Temperature
Humidity
60±2℃
90~95%RH
Rated current
500±2hour
Applied current
Time
ꢀꢀꢀ
19.Low temperature life test
Inductance change:Within±10%
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type:
No significant abnormality in appearance.
Temperature
Duration
ー40±2℃
1000hours
Recovery: At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
NRH24, NR30/40/60/80, NRG40Type, NR10050 Type:
The test samples shall be soldered to the test board
by the reflow.
After that, the test samples shall be placed at test
conditions as shown in below table.
Temperature
Time
-40±3℃
500±24hour
Inductance change:
Within±10%
Inductance change:
Within±10%
BRC1608,BRL2012,BRC2016,BRL2518,BRL3225Type:
20.High temperature life
Temperature
Duration
85±2℃
1000hours
test
No significant abnormality in
No significant abnormality in
Recovery: At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
appearance.
appearance.
NR10050 Type:
Temperature
105±3℃
Time
500±24hour
Recovery: At least 2hrs of recovery under the standard
condition after the test, followed by the measurement
within 48 hrs.
Inductance change:
21.Loading at high
NRH24, NR30/40/60/80, NRG40Type
:
Within±10%
temperature life test
The test samples shall be soldered to the test board
by the reflow soldering
No significant abnormality in
appearance.
Temperature
Applied current
Time
85±2℃
Rated current
500±24hour
22.Standard condition
Standard test condition : Unless otherwise specified, temperature is 20±15% and 65±20%of
relative humidity.
When there are question concerning measurement result : In order to provide correlation date, the
test shall be condition of 20±2℃ of temperature, 65±5% relative humidity.
Inductance is in accordance with our measured value.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
373
△
△
PRECAUTIONS
SMD Inductors
Stages
Precautions
Technical considerations
1.Circuit Design
Operating environment,
1.The products described in this specification are intended for
use in general electronic equipment,(office supply
equipment, telecommunications systems, measuring
equipment, and household equipment). They are not
intended for use in mission-critical equipment or systems
requiring special quality and high reliability (traffic systems,
safety equipment, aerospace systems, nuclear control
systems and medical equipment including life-support
systems,) where product failure might result in loss of life,
injury or damage. For such uses, contact TAIYO YUDEN
Sales Department in advance.
2.PCB Design
Land pattern design
1.Please refer to a recommended land pattern.
Surface Mounting
・Mounting and soldering conditions should be checked beforehand.
・Applicable soldering process to this products is reflow soldering only.
5
1. When installing products, care should be taken not to apply distortion stress as it
may deform the products.
3.Considerations for
automatic placement
Adjustment of mounting machine
1.Excessive impact load should not be imposed on the
products when mounting onto the PC boards.
2.Mounting and soldering conditions should be checked
beforehand.
4.Soldering
Reflow soldering
1.If products are used beyond the range of the recommended conditions, heat stresses
may deform the products, and consequently degrade the reliability of the products.
1.Please contact any of our offices for a reflow soldering, and
refer to the recommended condition specified.
2.This products is reflow soldering only.
【BRC1608, BRL2012, BRL2518, BRC2016, BRL3225Type】
Recommended reflow condition(Pb free solder)
3.Please do not add any stress to a product until it returns in
normal temperature after reflow soldering.
Lead free soldering
5sec max
300
Peak:260+5/ー0℃
150~180
200
1.When using products with lead free soldering, we request to
use them after confirming of adhesion, temperature of
resistance to soldering heat, soldering etc sufficiently.
Recommended conditions for using a soldering iron:
( NR10050 type)
30±10sec
100
230℃ min
90±30sec
0
Heating Time【sec】
Put the soldering iron on the land-pattern.
Soldering iron's temperature - Below 350 ℃
Duration - 3 seconds or less
【NRH24, NR30/40/60/80Type】
ꢀ
Recommended reflow condition(Pb free solder)
5sec max
300
200
100
The soldering iron should not directly touch the inductor.
Peak:250+5/ー0℃
150~180
30±10sec
230℃ min
90±30sec
0
Heating Time【sec】
【NR10050Type】
Recommended reflow condition(Pb free solder)
5sec max
300
200
100
Peak:250+5/ー0℃
150~180
30±10sec
230℃ min
90±30sec
0
Heating Time【sec】
Cleaning conditions
1.Washing by supersonic waves shall be avoided.
5.Cleaning
6.Handling
1.If washing by supersonic waves, supersonic waves may cause broken products.
Handling
1.Keep the product away from all magnets and magnetic objects.
Breakaway PC boards (splitting along perforations)
1.When splitting the PC board after mounting product, care
should be taken not to give any stresses of deflection or
twisting to the board.
1.Planning pattern configurations and the position of products should be carefully
performed to minimize stress.
2.Board separation should not be done manually, but by using
the appropriate devices.
Mechanical considerations
1.Please do not give the product any excessive mechanical shocks.
2.Please do not add any shock and power to a product in
transportation.
1.There is a case to be damaged by a mechanical shock.
2.There is a case to be broken by the handling in transportation.
Pick-up pressure
1.Please do not push to add any pressure to a winding part.
Please do not give any shock and push into a ferrite core
exposure part.
1.Damage and a characteristic can vary with an excessive shock or stress.
Packing
1.Please avoid accumulation of a packing box as much as possible.
1.There is a case that transformation and a product of tape are damaged by
accumulation of a packing box.
7.Storage conditions
Storage
1.To maintain the solderability of terminal electrodes and to
keep the packing material in good condition, temperature
and humidity in the storage area should be controlled.
・Recommended conditions
1.Under a high temperature and humidity environment, problems such as reduced
solderability caused by oxidation of terminal electrodes and deterioration of
taping/packaging materials may take place.
ꢀAmbient temperatureꢀꢀꢀꢀꢀ 0~40℃
ꢀHumidity
ꢀBelow 70% RH
The ambient temperature must be kept below 30℃. Even under
ideal storage conditions, solderability of products electrodes
may decrease as time passes. For this reason, product should
be used within 6 months from the time of delivery.
In case of storage over 6 months, solderability shall be
checked before actual usage.
!
当社カタログをご使用の際には「当社製品
に関するお断り」を必ずお読みください。
!
Please read the "Notice for TAIYO YUDEN products" before using this catalog.
375
△
△
相关型号:
NRGB100M100V6.3X11F
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 10uF, RADIAL LEADED, ROHS COMPLIANT
NICHICON
NRGB100M100V6.3X11F1F
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 100V, 20% +Tol, 20% -Tol, 10uF,
NICHICON
NRGB100M100V6.3X11F3CF
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 100V, 20% +Tol, 20% -Tol, 10uF,
NICHICON
NRGB100M100V6.3X11F3F
Aluminum Electrolytic Capacitor, Polarized, Aluminum, 100V, 20% +Tol, 20% -Tol, 10uF,
NICHICON
NRGB100M100V6.3X11TBF
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 10uF, RADIAL LEADED, ROHS COMPLIANT
NICHICON
NRGB100M100V6.3X11TBNF
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 10uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
NICHICON
NRGB100M100V6.3X11TBSTF
Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 100V, 20% +Tol, 20% -Tol, 10uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
NICHICON
©2020 ICPDF网 联系我们和版权申明